Adhesive failure occurs at the interface between the adhesive and the adherend, while cohesive failure occurs within the adhesive itself. […]

Shear vs Friction Shear involves a force acting parallel to a surface, causing layers of the material to slide past

Line tension in dislocation theory describes the energetic tendency of a dislocation line to resist bending or curvature. This energy

The shear value for partially grouted CMU is determined based on material characteristics (CMU, grout, reinforcement), structural parameters (compressive strength,

The acromioclavicular shear test, also known as the AC shear test, is a physical examination maneuver used to diagnose injuries

Compression-tension shear is a failure mode that occurs when a material is subjected to a combination of compressive and tensile

Shear stress sign is a measure of the tangential force per unit area acting on a surface or plane within

Critical resolved shear stress (CRSS) is the minimum shear stress required to initiate plastic deformation. It depends on the edge

Double shear stress is a type of shear stress that occurs when a material is subjected to two equal and

Critical resolved shear stress (CRSS) is the minimum shear stress required for a material to begin plastic deformation. It is

Core Entities Physical Properties: Cohesive soil, characterized by fine particle size, exhibits plasticity, cohesion, and low permeability due to its

Shear thickening fluid is a non-Newtonian fluid that increases in viscosity when subjected to shear stress. This behavior is due