Physics Study

Motorbike lean angle refers to the angle formed between the vertical and a line perpendicular to the bike’s rear tire […]

While friction encompasses the resistance to motion between two surfaces in contact, shear specifically refers to the deformation of a

Undrained shear strength (Su) is a critical parameter in geotechnical engineering, measuring the soil’s resistance to deformation without drainage. Grain

Resolved shear stress is the component of shear stress parallel to the plane of interest. It is determined by multiplying

Critical resolved shear stress (CRSS) represents the minimum stress required for dislocation movement in a material and is influenced by

Positive shear hcp refers to hexagonal close-packed (HCP) metals with a positive shear modulus, indicating their high resistance to shear

Shear in physics involves the deformation of materials under applied forces that cause parallel layers to slide past each other.

Adhesive failure occurs at the interface between the adhesive and the adherend, while cohesive failure occurs within the adhesive itself.

Shear vs Friction Shear involves a force acting parallel to a surface, causing layers of the material to slide past

Line tension in dislocation theory describes the energetic tendency of a dislocation line to resist bending or curvature. This energy

The shear value for partially grouted CMU is determined based on material characteristics (CMU, grout, reinforcement), structural parameters (compressive strength,

The acromioclavicular shear test, also known as the AC shear test, is a physical examination maneuver used to diagnose injuries